Low Maintenance Heavy Duty Parking Boom Barrier for Airport
Shopping Mall
1 General description
We are specialized in manufacturing integreted intelligent barrier gate. With international advanced
technology, we realize the automatization & intellectualization of barrier gate, which could be operated
safely, conveniently and quickly.
2 Characteristics
a. Speical movement mechanism, with no gear or belt; no need for maintenance; stable performance and
long life-span
b. Specially-designed balance mechanism, which makes boom start slowly, run quickly and stop slowly.
c．Avoid vibrating caused by boom’s running;
d．Only 90 degree running for the boom, to avoid the accident of 360 degree running caused by
abnormal failures.
e．Specially-designed low-speed aluminum-casing motor, integrated gearbox with low noise & quick heat-
radiation;
f．Intelligent over-heat protection system for driving mechanism, to control motor’s temperature and avoid
damaging easily during frequent usage.
3 Technical parameters
a. Power supply:AC220V±10%50HZ AC110V±10%50HZ/60HZ
b. Working temperature:-40℃～85℃
c. Rated power:70W/150W
d. Relative humidity:≥90%
e.size: 340*280*1030mm
4 Safety notes
a. During running, do not open the case-cover or case-door, to avoid accident.
b. Normally, users can not change the wire layout inside barrier gate. Please just connect the gate with
220V power supply.
c. The power supply system should be equipped with leakage breaker (≥10A).
d. During arm going down, do not place anything under the booms; and no body is allowed to standing or
walking under the boom.
e．When power cuts, first, turn off the power connection; then adjust the boom to vertical position by
turning the manual swing manually.
f. Normally, do not increase or decrease the length or weight of the boom, to avoid losing balance. If
necessary, professional staff is required.
g. Normally, do not adjust positions of mechnical limit switch or photoelectrilimit switch.
5 Specification:
|
Type
|
Model: GAT-P37
|
|
Operation time
|
1.8s, 3s, 5s, 6s Customized |
| Arm Type |
Straight Arm: Max 6 meters, Size 45×100mm and 45*80 mm aluminum alloy
Fence Arm: Two or three fence arm, Max 4.5 meters, aluminum alloy
Folding Arm: 90 or 180 degree folding arm, max 5 meters, aluminum alloy
|
| Material |
Galvanized sheet or Cold roll sheets, 2mm thickness, can be heavy duty
Coated with epoxy paint for weatherproof protection
|
| Size |
350*280*1070mm
|
| Spring And Bearing |
Heat Treatment: more durable, more than 5 million times through operation testing
|
| Rating Power |
80W
|
| Rating Voltage |
AC 220V/110V±10%, 50/60HZ
|
| Remote Control Distance |
less than 50 meters
|
| Packing Size |
430*360*1150mm , strong carton case with cushion
inside with air bubble film for protection,outside with a crate package
|
| G.W |
60 KG
|
| Delivery |
By Sea: big order(more than 100 sets), Cheap, suggested
If urgent, can be delivery by Airplane or express
|
| Payment |
Sample: full payment
Order: usually 30%-40% advance deposite, balance before shipment
|
| Advantages |
1. quick delivery time, 3-5 days for 50 sets after received advance deposite
2. 9 years OEM/ODM experience
3. quick response for handling problems
|
| Application |
Suitable for indoor as well as outdoor parking area at airport, shopping mall,
warehouse,hotel, factories, condominium, car rental companies, etc. It can
also be customized to beused together with any auto-pay ticketing parking
or access control system
|
7 Common problems & solutions
|
Common problem
|
Analysis
|
Solution
|
|
When motor running, the boom does not work.
|
- the key-pin of main shaft of motor drops
- bending-arm of mechanism part breaks-down
|
1. open the motor and refix the key-pin
2. dismount the mechanism part and replace the bending-arm
|
|
The arm vibrates during moving-down or reaching its horizontal position
|
1. Non-balance caused by weak spring tension;
2. Arm’s screws are loose;
3. The case is not fixed well.
|
1. replace the spring according to the Matching table of starndard spring or change hanging-hole’s position; or adjust the connection screw-rod of the spring to correct position;
2. fasten arm’s screws;
3. fasten the botls of the case;
|
|
The arm stops during movement.
|
- wrong adjustment of limit switches
- too much spring tension
|
- check the connection of limit switches and correct;
(see connection drawing fordetails)
- replace the spring or change hanging-hole’s position;
|
|
Anti-collision fails
|
ground sensor or IR wire damages or wrong connection
|
Replace ground sensor or Irparts, correct the connection carefully according to the drawing;
|
|
The arm could not reach right position.
|
Wrong adjustment of limit switches
|
place the arm in horizontal orveritical position, adjust the photo-barrierto the middle of photoelectric switches till lightis on. Red light for reaching horizontal position; green light is for reaching vertical position;
|
8 Why Coose Goldantell
1.One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
a. Broken by wrong installation.
b Broken by improper voltae.
c. The surfaces of the system destroyed by wrong installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if there is any.
The explaining authority of this product instruction and service article belong to the production factory
Product Tags:
|
|
Low Maintenance Heavy Duty Parking Boom Barrier for Airport Shopping Mall Images
|
